Description

Acudor Roof Hatches are designed to provide convenient, economical access to the Roof of a building.  Available in prime coated galvanized steel or aluminum.  Our hatches are designed with safety, durability and ease of operation in mind.

Specifications

Cover:   

14 gage galvanized steel, 0.125 aluminum in box type design with 1" rigid fiberglass insulation and 22 gage galvanized steel, 0.040 aluminum cover liner.  Continuous santoprene weather, draft seal is attached to inside of cover to provide a flush, tight fit.  The cover is designed to support a live load of 40 lbs./sq. ft..

Curb:   

14 gage galvanized steel 0.125 aluminum with 1" rigid fiberglass insulation at curb exterior.  Curb is 12" high, and has 3-1/2" wide mounting flange with pre-drilled holes.

Hinge:   

Steel and aluminum hinges.

Opening Device:

Fully enclosed compression spring operators allow cover to open and close easily.  Automatic hold open arm with red vinyl grip release keeps cover in open position when needed, and allows for easy control when closing hatch cover.

Latch:

Self-latching outside turn handle with inside lever handle permits cover to always latch securely.  Inside and outside padlock provisions allow for extra security.

Finish:

Galvanized steel:  prime painted with rust-inhibiting gray primer.

Optional Features:

• Acrylic Domes
• Stainless Steel Hardware
• Madified curb for metal building
• Louvered Curbs
• Curb Mounted Units

Standard Sizes: